Projects

A two-level excavation-shoring system of roughly 110 tons at Tel HaShomer. Each level was erected in just three days — a tight schedule that demanded close coordination and precise on-site execution.

A 120-ton, three-level retaining wall support system delivered as a full design-build project. Moment Steel performed the structural design, scanned the pile wall, and fabricated the steel to match real site deviations — all under a challenging project schedule.

A design-build retaining wall support system installed against the building core during staged construction. By rethinking the structural scheme, Moment Steel reduced the steel weight by more than 60% while maintaining the required support capacity throughout the works.

Design and detailing of prestressed composite columns for a 91-story tower, including post-tensioning elements connected to the concrete core and steel columns fabricated at varying angles. The project was developed through advanced code-based parametric modeling.

Horizontal support system for existing round columns during foundation strengthening works at the Azrieli Towers in Tel Aviv, where slabs were cut down to level -4. Each floor was scanned separately, allowing Moment Steel to develop a repeatable collar system adapted to site deviations and suitable for fast fabrication.

A modular climbing wall support system designed for slab construction stages in double-height areas of the Spiral Tower. The system was engineered to support an 11-meter-high wall and be reused across multiple floors with controlled installation geometry.